Mahindra · Utility
Mahindra 4540 4WD Specs and Implements That Fit
Mahindra 4500 Series utility tractor: 41 engine hp, 31 PTO hp, Category 1 & 2 hitch. Every spec below is from Mahindra’s own documents, with the source listed.
What fits
Implements That Fit the 4540 4WD
Each implement on this site checked against the 4540 4WD’s horsepower, hitch, lift and loader specs.
Farm Equipment Compare may earn a commission when you buy through links on this page, at no extra cost to you. Prices come from manufacturer and dealer listings. Disclosure.
Specs
Mahindra 4540 4WD Specs
Drawing of a utility tractor, not the 4540 4WD itself.
| Engine HP | 41 hp [1] |
|---|---|
| PTO HP | 31 hp [1] |
| Transmission | 8F/2R full constant mesh [1] |
| Drive | 4WD [1] |
| 3-point hitch | Category 1 & 2 [1] |
| Lift at the lift points | Not published by Mahindra |
| Lift 24 in behind the lift points | 3,527 lb [1] |
| Rear PTO | 540 rpm [1] |
| Mid PTO | Not published by Mahindra |
| Total hydraulic flow | Not published by Mahindra |
| Implement (main) flow | 8.7 gpm [2] |
| Steering flow | Not published by Mahindra |
| Rear remotes, standard | Not published by Mahindra |
| Weight | 5,192 lb (Weight, 4540 4WD (operating weight)) [1] |
| Rear tread | Not published by Mahindra |
| Loader | 4550-4L [1] |
| Loader lift at the pivot pins | 2,866 lb [2] |
| Loader coupler | skid steer (SSQA) [2] |
| Fuel tank | 14.6 gal [1] |
Compare
Compare the 4540 4WD
Tractors Near the 4540 4WD in PTO Horsepower
Maintenance
4540 4WD Filter Change Intervals
Mahindra’s manual lists these intervals. It does not list filter part numbers, so get them from the dealer by serial number.
| Engine oil | Every 200 hours [source] |
|---|---|
| Fuel | Every 200 hours [source] |
| Hydraulic suction filter | Every 500 hours [source] |
| Air primary (paper element) | Every 900 hours [source] |
Questions
Mahindra 4540 4WD Questions
How much can the Mahindra 4540 4WD lift with its 3-point hitch?
Mahindra rates it at 3,527 lb 24 in behind the lift points.
What is the PTO horsepower of the Mahindra 4540 4WD?
31 PTO hp from a 41 hp engine, per Mahindra.
What loader fits the Mahindra 4540 4WD?
Mahindra lists the 4550-4L loader, rated 2,866 lb at the pivot pins. Coupler: skid steer (SSQA).
What hitch category is the Mahindra 4540 4WD?
Category 1 & 2, per Mahindra.
How much does the Mahindra 4540 4WD weigh?
5,192 lb (Weight, 4540 4WD (operating weight)), per Mahindra.
Sources for the Mahindra 4540 4WD Specs
Specs checked October 2026.
- Mahindra 4500 Series page (Specifications table), Mahindra USA, checked 2026-10-05
- Mahindra 4500 Series brochure (PDF), Mahindra USA, checked 2026-10-05
Where the maker’s own documents disagree
- Brochure lift row reads '3525 3527' across 4540 2WD / 4540 4WD / 4550 4WD; series page gives 3527 @24" aft for 4540 4WD.
- Steering pump output printed '5.8 5' across three columns; column mapping unclear so hyd_steering_gpm left null.
- Rear remotes row '1 optional | 1 spool standard'; column mapping unclear, so left null.
- Hydraulic 8.7 gpm: series page calls it 'Maximum total flow', brochure lists it as hydraulic system pump output with a separate steering pump.
- Brochure describes loader as 'Quick attach skid steer style loader'; 2WD uses 4550-2L.