Mahindra · Compact
Mahindra 1626 HST Specs and Implements That Fit
Mahindra 1600 Series compact tractor: 24.8 engine hp, 19 PTO hp, Category 1 hitch. Every spec below is from Mahindra’s own documents, with the source listed.
What fits
Implements That Fit the 1626 HST
Each implement on this site checked against the 1626 HST’s horsepower, hitch, lift and loader specs.
Farm Equipment Compare may earn a commission when you buy through links on this page, at no extra cost to you. Prices come from manufacturer and dealer listings. Disclosure.
Specs
Mahindra 1626 HST Specs
Drawing of a compact tractor, not the 1626 HST itself.
| Engine HP | 24.8 hp [1] |
|---|---|
| PTO HP | 19 hp [1] |
| Transmission | HST (3 range) [1] |
| Drive | Not published by Mahindra |
| 3-point hitch | Category 1 [1] |
| Lift at the lift points | Not published by Mahindra |
| Lift 24 in behind the lift points | 1,720 lb [1] |
| Rear PTO | 540 rpm [1] |
| Mid PTO | 2,000 rpm (2000 (Opt.) @ 2526 engine rpm) [1] |
| Total hydraulic flow | 10.8 gpm [1] |
| Implement (main) flow | 7.5 gpm [1] |
| Steering flow | 3.3 gpm [1] |
| Rear remotes, standard | Optional Single |
| Weight | 2,459 lb (Weight (1626 HST, series spec table)) [1] |
| Rear tread | Not published by Mahindra |
| Loader | 1626L [1] |
| Loader lift at the pivot pins | 1,653 lb [2] |
| Loader coupler | skid steer (SSQA) [2] |
| Fuel tank | 7.1 gal [1] |
Compare
Compare the 1626 HST
Tractors Near the 1626 HST in PTO Horsepower
Maintenance
1626 HST Filter Change Intervals
Mahindra’s manual lists these intervals. It does not list filter part numbers, so get them from the dealer by serial number.
| Hydraulic | Every 300 hours [source] |
|---|---|
| Hydrostatic (hst) filter | Every 300 hours [source] |
| Air element | Every 200 hours [source] |
Questions
Mahindra 1626 HST Questions
How much can the Mahindra 1626 HST lift with its 3-point hitch?
Mahindra rates it at 1,720 lb 24 in behind the lift points.
What is the PTO horsepower of the Mahindra 1626 HST?
19 PTO hp from a 24.8 hp engine, per Mahindra.
What loader fits the Mahindra 1626 HST?
Mahindra lists the 1626L loader, rated 1,653 lb at the pivot pins. Coupler: skid steer (SSQA).
What hitch category is the Mahindra 1626 HST?
Category 1, per Mahindra.
How much does the Mahindra 1626 HST weigh?
2,459 lb (Weight (1626 HST, series spec table)), per Mahindra.
Sources for the Mahindra 1626 HST Specs
Specs checked October 2026.
- Mahindra 1600 Series page (Specifications table), Mahindra USA, checked 2026-10-05
- Mahindra 1600 Series brochure (PDF, rev 2025-09-02), Mahindra USA, checked 2026-10-05
Where the maker’s own documents disagree
- Series card on mahindrausa.com says 25.9 HP; spec table and brochure say 24.8 hp @ 2500.
- 1626 Shuttle variant: 8F/8R, 21.5 PTO hp, 2,437 lb.
- Drive not stated in spec table; brochure prose mentions 'a heavy-built 4×4' for the series, so drive left null.
- Loader lift published as 'Lift Capacity at Pivot Pin (lb) Full Height' 1,653 lb in brochure.