LS · Sub-Compact
LS MT225S Specs and Implements That Fit
LS MT2S Series sub-compact tractor: 24.7 engine hp, 19.3 PTO hp, Category 1 hitch. Every spec below is from LS’s own documents, with the source listed.
What fits
Implements That Fit the MT225S
Each implement on this site checked against the MT225S’s horsepower, hitch, lift and loader specs.
Farm Equipment Compare may earn a commission when you buy through links on this page, at no extra cost to you. Prices come from manufacturer and dealer listings. Disclosure.
Specs
LS MT225S Specs
Drawing of a sub-compact tractor, not the MT225S itself.
| Engine HP | 24.7 hp [1] |
|---|---|
| PTO HP | 19.3 hp [1] |
| Transmission | HST, 3 ranges [1] |
| Drive | Not published by LS |
| 3-point hitch | Category 1 [1] |
| Lift at the lift points | 1,896 lb [1] |
| Lift 24 in behind the lift points | Not published by LS |
| Rear PTO | 540 rpm [1] |
| Mid PTO | 2,500 rpm (optional) [1] |
| Total hydraulic flow | 9.3 gpm [1] |
| Implement (main) flow | 5.6 gpm [1] |
| Steering flow | 3.7 gpm [1] |
| Rear remotes, standard | 0 (1 pair (option)) [1] |
| Weight | 1,764 lb (total weight without ballast) [1] |
| Rear tread | Not published by LS |
| Loader | LL2300 [3] |
| Loader lift at the pivot pins | 1,067 lb [3] |
| Loader coupler | Not published by LS |
| Fuel tank | 6.8 gal [1] |
Compare
Compare the MT225S
Tractors Near the MT225S in PTO Horsepower
Maintenance
MT225S Filter Change Intervals
LS’s manual lists these intervals. It does not list filter part numbers, so get them from the dealer by serial number.
| Engine oil | Every 250 hours [source] |
|---|---|
| Hydraulic | Every 250 hours [source] |
| Hst filter | Every 250 hours [source] |
| Fuel filter cartridge | Every 500 hours [source] |
| Air cleaner element | Every 250 hours [source] |
Questions
LS MT225S Questions
How much can the LS MT225S lift with its 3-point hitch?
LS rates it at 1,896 lb at the lift points.
What is the PTO horsepower of the LS MT225S?
19.3 PTO hp from a 24.7 hp engine, per LS.
What loader fits the LS MT225S?
LS lists the LL2300 loader, rated 1,067 lb at the pivot pins. The coupler type is not published.
What hitch category is the LS MT225S?
Category 1, per LS.
How much does the LS MT225S weigh?
1,764 lb (total weight without ballast), per LS.
Sources for the LS MT225S Specs
Specs checked October 2026.
- LS Tractor USA MT225S product page (spec table), LS Tractor USA, checked 2026-10-05
- LS Tractor MT2S Series brochure (PDF), LS Tractor USA, checked 2026-10-05
- LS Tractor USA front-end loaders page, LS Tractor USA, checked 2026-10-05
Where the maker’s own documents disagree
- Chosen over MT347 because MT225S is a single configuration with a complete spec table; MT347 values split across gear/HST/cab variants. The old MT225 is now sold as MT225S (MT2S Series) and MT225E/HE (MT2E).
- LS site classes MT225S as 'Small Compact'; mapped to sub-compact by its 24.7 hp / 1,764 lb size.
- LL2300 lift capacity 1,067 lb at pivot pin, max height in both the MT2S brochure and the loaders page; LL2001 listed at 1,127 lb in the brochure but 1,067 lb on the loaders page.
- Drive (2WD/4WD) not stated in the spec table.
Header photo: LS R4041H by Scoty6776, CC BY 3.0, via Wikimedia Commons.