New Holland · Hay Rakes
Hay Rakes That Fit the New Holland Workmaster 40
2 of 5 hay rakes fit by the makers’ ratings, 0 fit with one thing to check, and 3 don’t. Each is checked against the Workmaster 40’s 32 PTO hp, a Category 1 hitch and 1,433 lb lift at 24 in.
Answer
What Size Hay Rake Fits a Workmaster 40
By the published numbers, the Workmaster 40 handles hay rakes from 98 and 100 in wide. The widest one that fits is the MechMaxx HT100 100 in Rotary Hay Rake/Tedder at 100 in. The ones that don't fit fail on horsepower (3).
Titan 3-Point 8 ft Rotary Rake
- Horsepower Titan Attachments rates it for 18–50 tractor HP. The Workmaster 40 has 40 engine HP.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 380 lb. The Workmaster 40 lifts 1,433 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 40 has a 540 rpm rear PTO.
$2,299.97 lowest listed, PalletForks.com
5.0 of 5 from 1 review at PalletForks.com
Check price at Amazon →- PalletForks.com $2,299.97
- Amazon $2,299.97
Prices checked October 2026. Freight varies.
MechMaxx HT100 100 in Rotary Hay Rake/Tedder
- Horsepower MechMaxx rates it for 15–50 tractor HP. The Workmaster 40 has 40 engine HP.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 357 lb. The Workmaster 40 lifts 1,433 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 40 has a 540 rpm rear PTO.
$1,999 lowest listed, Amazon
4.6 of 5 from 9 reviews at MechMaxx
Check price at Amazon →Prices checked October 2026. Freight varies.
Farm Equipment Compare may earn a commission when you buy through links on this page, at no extra cost to you. Prices come from manufacturer and dealer listings. Disclosure.
Not a fit
Hay Rakes the Workmaster 40 Can’t Run
These are outside the Workmaster 40’s published specs. The reason is listed on each one.
Befco RS2-02R 2-Wheel Ground-Driven Wheel Rake
- Horsepower Befco rates it for 16–30 tractor HP. The Workmaster 40 has 40 engine HP, above the maximum the maker rates it for.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 194 lb. The Workmaster 40 lifts 1,433 lb 24 in behind the lift points.
Dealer price sold through Befco dealers
Specs at Befco →Befco RS2-03R 3-Wheel Ground-Driven Wheel Rake
- Horsepower Befco rates it for 16–30 tractor HP. The Workmaster 40 has 40 engine HP, above the maximum the maker rates it for.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 291 lb. The Workmaster 40 lifts 1,433 lb 24 in behind the lift points.
Dealer price sold through Befco dealers
Specs at Befco →Befco RS2-04V 4-Wheel V Wheel Rake
- Horsepower Befco rates it for 16–30 tractor HP. The Workmaster 40 has 40 engine HP, above the maximum the maker rates it for.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 353 lb. The Workmaster 40 lifts 1,433 lb 24 in behind the lift points.
Dealer price sold through Befco dealers
Specs at Befco →The numbers used
Workmaster 40 Specs Used to Check Hay Rakes
| Engine HP | 40 hp [1] |
|---|---|
| PTO HP | 32 hp [1] |
| 3-point hitch | Category 1 [1] |
| Lift at the lift points | 1,808 lb [1] |
| Lift 24 in behind the lift points | 1,433 lb [1] |
| Rear PTO | 540 rpm [1] |
| Rear remotes, standard | 0 [1] |
How the check works
Horsepower is checked against the range the implement maker publishes, using PTO HP or engine HP the way the maker states it. Weight is checked against the 3-point lift 24 in behind the lift points, where an implement's weight sits. Anything the maker does not publish is shown as unknown, not estimated.
Keep checking
More for the Workmaster 40 Besides Hay Rakes
Hay Rakes for Tractors Near the Workmaster 40
Hay Rake sizes and requirements · Match any implement to the Workmaster 40
Questions
Workmaster 40 and Hay Rakes: Common Questions
What size hay rake fits a New Holland Workmaster 40?
By the published numbers, the Workmaster 40 handles hay rakes from 98 and 100 in wide. The widest one that fits is the MechMaxx HT100 100 in Rotary Hay Rake/Tedder at 100 in. The ones that don't fit fail on horsepower (3).
Can a New Holland Workmaster 40 run a 12 ft hay rake?
Not by the published ratings of the models on this site. Befco RS2-04V 4-Wheel V Wheel Rake: Befco rates it for 16–30 tractor HP. The Workmaster 40 has 40 engine HP, above the maximum the maker rates it for.
Is the New Holland Workmaster 40 heavy enough to lift a hay rake?
New Holland rates the Workmaster 40 at 1,433 lb 24 in behind the lift points. The hay rakes on this site weigh 194 to 380 lb.
Header photo: New Holland Boomer 45 by TaurusEmerald, CC BY-SA 4.0, via Wikimedia Commons.