New Holland · Rotary Cutters
Rotary Cutters That Fit the New Holland Workmaster 25S
6 of 14 rotary cutters fit by the makers’ ratings, 0 fit with one thing to check, and 5 don’t. Each is checked against the Workmaster 25S’s 17.2 PTO hp, a Category 1 hitch and 728 lb lift at 24 in.
Answer
What Size Rotary Cutter Fits a Workmaster 25S
By the published numbers, the Workmaster 25S handles rotary cutters from 44, 48 and 60 in wide. The widest one that fits is the Titan Standard Series 5 ft Rotary Cutter at 60 in. The ones that don't fit fail on horsepower (5).
Titan Standard Series 4 ft Rotary Cutter
- Horsepower Titan Attachments rates it for 20–60 tractor HP. The Workmaster 25S has 24.7 engine HP.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 440 lb. The Workmaster 25S lifts 728 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
$2,053.97 lowest listed, PalletForks.com
4.0 of 5 from 1 review at PalletForks.com (all sizes in that listing)
Check price at PalletForks.com →- PalletForks.com $2,053.97
Prices checked October 2026. Freight varies.
Titan Standard Series 5 ft Rotary Cutter
- Horsepower Titan Attachments rates it for 20–60 tractor HP. The Workmaster 25S has 24.7 engine HP.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 518 lb. The Workmaster 25S lifts 728 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
$2,979.97 lowest listed, PalletForks.com
4.0 of 5 from 1 review at PalletForks.com (all sizes in that listing)
Check price at PalletForks.com →- PalletForks.com $2,979.97
Prices checked October 2026. Freight varies.
Bush Hog BH114 44 in Rotary Cutter
- Horsepower Bush Hog rates it for 15 or more PTO HP. The Workmaster 25S has 17.2 PTO HP.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 400 lb. The Workmaster 25S lifts 728 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
Dealer price sold through Bush Hog dealers
Sold online and fits: Titan Standard Series 4 ft Rotary Cutter, $2,053.97
Check price at PalletForks.com →Specs at Bush Hog →Land Pride RCR1248 48 in Rotary Cutter
- Horsepower Land Pride rates it for 20–60 tractor HP. The Workmaster 25S has 24.7 engine HP.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 413 lb. The Workmaster 25S lifts 728 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
Dealer price sold through Land Pride dealers
Sold online and fits: Titan Standard Series 4 ft Rotary Cutter, $2,053.97
Check price at PalletForks.com →Specs at Land Pride →Woods BrushBull BB48.30 48 in Rotary Cutter
- Horsepower Woods rates it for 15–50 PTO HP. The Workmaster 25S has 17.2 PTO HP.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 635 lb. The Workmaster 25S lifts 728 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
Dealer price sold through Woods dealers
Sold online and fits: Titan Standard Series 4 ft Rotary Cutter, $2,053.97
Check price at PalletForks.com →Specs at Woods →Land Pride RCR1260 60 in Rotary Cutter
- Horsepower Land Pride rates it for 20–60 tractor HP. The Workmaster 25S has 24.7 engine HP.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 496 lb. The Workmaster 25S lifts 728 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
Dealer price sold through Land Pride dealers
Sold online and fits: Titan Standard Series 5 ft Rotary Cutter, $2,979.97
Check price at PalletForks.com →Specs at Land Pride →King Kutter 4 ft Lift Kutter, 40 HP Gearbox
- Horsepower King Kutter does not publish a horsepower range for this model.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity King Kutter does not publish the weight, so it can't be checked against the Workmaster 25S's lift.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
King Kutter 5 ft Lift Kutter, 40 HP Gearbox
- Horsepower King Kutter does not publish a horsepower range for this model.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity King Kutter does not publish the weight, so it can't be checked against the Workmaster 25S's lift.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
King Kutter 6 ft Lift Kutter, 40 HP Gearbox
- Horsepower King Kutter does not publish a horsepower range for this model.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity King Kutter does not publish the weight, so it can't be checked against the Workmaster 25S's lift.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
Farm Equipment Compare may earn a commission when you buy through links on this page, at no extra cost to you. Prices come from manufacturer and dealer listings. Disclosure.
Not a fit
Rotary Cutters the Workmaster 25S Can’t Run
These are outside the Workmaster 25S’s published specs. The reason is listed on each one.
Titan PRO Series 6 ft Rotary Cutter
- Horsepower Titan Attachments rates it for 25–90 tractor HP. The Workmaster 25S has 24.7 engine HP, below the minimum.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 945 lb, more than the Workmaster 25S's 728 lb at 24 in but under its 992 lb at the lift points. Expect it to lift slowly or not to full height.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
$3,499.97 lowest listed, PalletForks.com
4.4 of 5 from 5 reviews at PalletForks.com
Check price at PalletForks.com →- PalletForks.com $3,499.97
Prices checked October 2026. Freight varies.
Woods BrushBull BB60.30 60 in Rotary Cutter
- Horsepower Woods rates it for 25–50 PTO HP. The Workmaster 25S has 17.2 PTO HP, below the minimum.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 728 lb. The Workmaster 25S lifts 728 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
Dealer price sold through Woods dealers
Specs at Woods →Bush Hog BH116 68 in Rotary Cutter
- Horsepower Bush Hog rates it for 25 or more PTO HP. The Workmaster 25S has 17.2 PTO HP, below the minimum.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 600 lb. The Workmaster 25S lifts 728 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
Dealer price sold through Bush Hog dealers
Specs at Bush Hog →Land Pride RCR1272 72 in Rotary Cutter
- Horsepower Land Pride rates it for 25–60 tractor HP. The Workmaster 25S has 24.7 engine HP, below the minimum.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 568 lb. The Workmaster 25S lifts 728 lb 24 in behind the lift points.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
Dealer price sold through Land Pride dealers
Specs at Land Pride →Woods BrushBull BB72.30 72 in Rotary Cutter
- Horsepower Woods rates it for 30–65 PTO HP. The Workmaster 25S has 17.2 PTO HP, below the minimum.
- 3-point hitch Category 1 implement on a Category 1 hitch.
- Lift capacity It weighs 882 lb, more than the Workmaster 25S's 728 lb at 24 in but under its 992 lb at the lift points. Expect it to lift slowly or not to full height.
- PTO It runs on a 540 rpm PTO. The Workmaster 25S has a 540 rpm rear PTO.
Dealer price sold through Woods dealers
Specs at Woods →The numbers used
Workmaster 25S Specs Used to Check Rotary Cutters
| Engine HP | 24.7 hp [1] |
|---|---|
| PTO HP | 17.2 hp [1] |
| 3-point hitch | Category 1 [1] |
| Lift at the lift points | 992 lb [1] |
| Lift 24 in behind the lift points | 728 lb [1] |
| Rear PTO | 540 rpm [1] |
| Rear remotes, standard | 0 [1] |
How the check works
Horsepower is checked against the range the implement maker publishes, using PTO HP or engine HP the way the maker states it. Weight is checked against the 3-point lift 24 in behind the lift points, where an implement's weight sits. Anything the maker does not publish is shown as unknown, not estimated.
Keep checking
More for the Workmaster 25S Besides Rotary Cutters
Rotary Cutters for Tractors Near the Workmaster 25S
Rotary Cutter sizes and requirements · Match any implement to the Workmaster 25S
Questions
Workmaster 25S and Rotary Cutters: Common Questions
What size rotary cutter fits a New Holland Workmaster 25S?
By the published numbers, the Workmaster 25S handles rotary cutters from 44, 48 and 60 in wide. The widest one that fits is the Titan Standard Series 5 ft Rotary Cutter at 60 in. The ones that don't fit fail on horsepower (5).
Can a New Holland Workmaster 25S run a 6 ft rotary cutter?
Not by the published ratings of the models on this site. Titan PRO Series 6 ft Rotary Cutter: Titan Attachments rates it for 25–90 tractor HP. The Workmaster 25S has 24.7 engine HP, below the minimum. Bush Hog BH116 68 in Rotary Cutter: Bush Hog rates it for 25 or more PTO HP. The Workmaster 25S has 17.2 PTO HP, below the minimum. Land Pride RCR1272 72 in Rotary Cutter: Land Pride rates it for 25–60 tractor HP. The Workmaster 25S has 24.7 engine HP, below the minimum. Woods BrushBull BB72.30 72 in Rotary Cutter: Woods rates it for 30–65 PTO HP. The Workmaster 25S has 17.2 PTO HP, below the minimum.
Is the New Holland Workmaster 25S heavy enough to lift a rotary cutter?
New Holland rates the Workmaster 25S at 728 lb 24 in behind the lift points. The rotary cutters on this site weigh 400 to 945 lb.
Header photo: New Holland Boomer 45 by TaurusEmerald, CC BY-SA 4.0, via Wikimedia Commons.