Mahindra · Compact
Mahindra 1640 HST Specs and Implements That Fit
Mahindra 1600 Series compact tractor: 38.7 engine hp, 27.7 PTO hp, Category 1 hitch. Every spec below is from Mahindra’s own documents, with the source listed.
What fits
Implements That Fit the 1640 HST
Each implement on this site checked against the 1640 HST’s horsepower, hitch, lift and loader specs.
Farm Equipment Compare may earn a commission when you buy through links on this page, at no extra cost to you. Prices come from manufacturer and dealer listings. Disclosure.
Specs
Mahindra 1640 HST Specs
Drawing of a compact tractor, not the 1640 HST itself.
| Engine HP | 38.7 hp [1] |
|---|---|
| PTO HP | 27.7 hp [1] |
| Transmission | HST (3 range) [1] |
| Drive | Not published by Mahindra |
| 3-point hitch | Category 1 [1] |
| Lift at the lift points | Not published by Mahindra |
| Lift 24 in behind the lift points | 1,720 lb [1] |
| Rear PTO | 540 rpm [1] |
| Mid PTO | 2,000 rpm (2000 (Opt.) @ 2526 engine rpm) [1] |
| Total hydraulic flow | 11.4 gpm [1] |
| Implement (main) flow | 7.7 gpm [1] |
| Steering flow | 3.4 gpm [1] |
| Rear remotes, standard | Optional Single |
| Weight | 3,175 lb (Weight (1640 HST, series spec table)) [1] |
| Rear tread | Not published by Mahindra |
| Loader | 1640L [1] |
| Loader lift at the pivot pins | 1,830 lb [2] |
| Loader coupler | skid steer (SSQA) [2] |
| Fuel tank | 7.7 gal [1] |
Compare
Compare the 1640 HST
Tractors Near the 1640 HST in PTO Horsepower
Maintenance
1640 HST Filter Change Intervals
Mahindra’s manual lists these intervals. It does not list filter part numbers, so get them from the dealer by serial number.
| Engine oil | Every 350 hours [source] |
|---|---|
| Hydraulic | Every 300 hours [source] |
| Hydrostatic (hst) filter | Every 300 hours [source] |
| Air element | Every 200 hours [source] |
Questions
Mahindra 1640 HST Questions
How much can the Mahindra 1640 HST lift with its 3-point hitch?
Mahindra rates it at 1,720 lb 24 in behind the lift points.
What is the PTO horsepower of the Mahindra 1640 HST?
27.7 PTO hp from a 38.7 hp engine, per Mahindra.
What loader fits the Mahindra 1640 HST?
Mahindra lists the 1640L loader, rated 1,830 lb at the pivot pins. Coupler: skid steer (SSQA).
What hitch category is the Mahindra 1640 HST?
Category 1, per Mahindra.
How much does the Mahindra 1640 HST weigh?
3,175 lb (Weight (1640 HST, series spec table)), per Mahindra.
Sources for the Mahindra 1640 HST Specs
Specs checked October 2026.
- Mahindra 1600 Series page (Specifications table), Mahindra USA, checked 2026-10-05
- Mahindra 1600 Series brochure (PDF, rev 2025-09-02), Mahindra USA, checked 2026-10-05
Where the maker’s own documents disagree
- SUBSTITUTE for Mahindra 2638: the 2600 Series is no longer on mahindrausa.com's current lineup (Oct 2026); 1640 is the closest current Mahindra compact by engine hp (38.7 vs 2638's 38).
- Total hydraulic flow: series page 11.4 gpm vs brochure 11.1 gpm.