LS · Sub-Compact
LS MT125 Specs and Implements That Fit
LS MT1 Series sub-compact tractor: 24.7 engine hp, 17.2 PTO hp, Category 1 hitch. Every spec below is from LS’s own documents, with the source listed.
What fits
Implements That Fit the MT125
Each implement on this site checked against the MT125’s horsepower, hitch, lift and loader specs.
Farm Equipment Compare may earn a commission when you buy through links on this page, at no extra cost to you. Prices come from manufacturer and dealer listings. Disclosure.
Specs
LS MT125 Specs
Drawing of a sub-compact tractor, not the MT125 itself.
| Engine HP | 24.7 hp [1] |
|---|---|
| PTO HP | 17.2 hp [1] |
| Transmission | HST, 2 ranges [1] |
| Drive | 4WD [1] |
| 3-point hitch | Category 1 [1] |
| Lift at the lift points | 992 lb [1] |
| Lift 24 in behind the lift points | 728 lb [1] |
| Rear PTO | 540 rpm [1] |
| Mid PTO | 2,500 rpm (standard; spec table says 2500 rpm, key-features text on same page says 2000 rpm) [1] |
| Total hydraulic flow | 6.7 gpm [1] |
| Implement (main) flow | 4.6 gpm [1] |
| Steering flow | 2.1 gpm [1] |
| Rear remotes, standard | 0 (rear remote valve (1 set) listed as an option) [1] |
| Weight | 1,444 lb (total weight without ballast) [1] |
| Rear tread | Not published by LS |
| Loader | LL1700 [2] |
| Loader lift at the pivot pins | 980 lb [2] |
| Loader coupler | Not published by LS |
| Fuel tank | 6.6 gal [1] |
Compare
Compare the MT125
Tractors Near the MT125 in PTO Horsepower
Maintenance
MT125 Filter Change Intervals
LS’s manual lists these intervals. It does not list filter part numbers, so get them from the dealer by serial number.
| Engine oil | Every 250 hours [source] |
|---|---|
| Hydraulic | Every 250 hours [source] |
| Hst filter | Every 250 hours [source] |
| Fuel filter cartridge | Every 500 hours [source] |
| Air cleaner element | Every 250 hours [source] |
Questions
LS MT125 Questions
How much can the LS MT125 lift with its 3-point hitch?
LS rates it at 992 lb at the lift points and 728 lb 24 in behind the lift points.
What is the PTO horsepower of the LS MT125?
17.2 PTO hp from a 24.7 hp engine, per LS.
What loader fits the LS MT125?
LS lists the LL1700 loader, rated 980 lb at the pivot pins. The coupler type is not published.
What hitch category is the LS MT125?
Category 1, per LS.
How much does the LS MT125 weigh?
1,444 lb (total weight without ballast), per LS.
Sources for the LS MT125 Specs
Specs checked October 2026.
- LS Tractor USA MT125 product page (spec table), LS Tractor USA, checked 2026-10-05
- LS Tractor MT1 Series brochure (PDF), LS Tractor USA, checked 2026-10-05
- LS Tractor USA front-end loaders page, LS Tractor USA, checked 2026-10-05
Where the maker’s own documents disagree
- Mid PTO: spec table and MT1 brochure say 2,500 rpm; key-features text on the product page says 2,000 rpm.
- 3-point lift: spec table 992 lb at hitch end; MT1 brochure feature callout says 970 lb; LS model-comparison PDF lists 970 lb at lift pin for MT122 and 728 lb at 24 in for MT125.
- Loader: LL1700 980 lb at pivot pin, max height (MT1 brochure); LS loaders page lists LL1700 980 lb and LL1102 1,008 lb at pivot pin, 1.5 m height. Product page headline 'Loader Lift Capacity 1,008 lbs.' refers to LL1102.
- Drive: 4WD per product page key-features text (lever-selectable 2WD/4WD).
- Weight: brochure lists 1,444 lb for MT125 and 1,433 lb for MT122.
Header photo: LS R4041H by Scoty6776, CC BY 3.0, via Wikimedia Commons.