Massey Ferguson · Compact
Massey Ferguson 2M.60 Specs and Implements That Fit
Massey Ferguson MF 2M Series compact tractor: 60.3 engine hp, 44.6 PTO hp, Category 1 & 2 hitch. Every spec below is from Massey Ferguson’s own documents, with the source listed.
What fits
Implements That Fit the 2M.60
Each implement on this site checked against the 2M.60’s horsepower, hitch, lift and loader specs.
Farm Equipment Compare may earn a commission when you buy through links on this page, at no extra cost to you. Prices come from manufacturer and dealer listings. Disclosure.
Specs
Massey Ferguson 2M.60 Specs
Drawing of a compact tractor, not the 2M.60 itself.
| Engine HP | 60.3 hp [1] |
|---|---|
| PTO HP | 44.6 hp [1] |
| Transmission | HST, 3 ranges (Servo-HST); 12×12 power shuttle also offered [1] |
| Drive | Not published by Massey Ferguson |
| 3-point hitch | Category 1 & 2 [1] |
| Lift at the lift points | 3,483 lb [1] |
| Lift 24 in behind the lift points | 3,086 lb [1] |
| Rear PTO | 540 rpm [1] |
| Mid PTO | Not published by Massey Ferguson |
| Total hydraulic flow | Not published by Massey Ferguson |
| Implement (main) flow | 12.6 gpm [1] |
| Steering flow | 7.1 gpm [1] |
| Rear remotes, standard | 'Rear remote valve and lever' listed under versatility; standard count not stated |
| Weight | 4,288 lb (base weight, ROPS (cab 4,674 lb)) [1] |
| Rear tread | Not published by Massey Ferguson |
| Loader | FL2814 [1] |
| Loader lift at the pivot pins | 2,570 lb [1] |
| Loader coupler | skid steer [1] |
| Fuel tank | 14 gal [1] |
Compare
Compare the 2M.60
Tractors Near the 2M.60 in PTO Horsepower
Questions
Massey Ferguson 2M.60 Questions
How much can the Massey Ferguson 2M.60 lift with its 3-point hitch?
Massey Ferguson rates it at 3,483 lb at the lift points and 3,086 lb 24 in behind the lift points.
What is the PTO horsepower of the Massey Ferguson 2M.60?
44.6 PTO hp from a 60.3 hp engine, per Massey Ferguson.
What loader fits the Massey Ferguson 2M.60?
Massey Ferguson lists the FL2814 loader, rated 2,570 lb at the pivot pins. Coupler: skid steer.
What hitch category is the Massey Ferguson 2M.60?
Category 1 & 2, per Massey Ferguson.
How much does the Massey Ferguson 2M.60 weigh?
4,288 lb (base weight, ROPS (cab 4,674 lb)), per Massey Ferguson.
Sources for the Massey Ferguson 2M.60 Specs
Specs checked October 2026.
- Massey Ferguson 2M Series spec sheet (PDF), AGCO Corporation (Massey Ferguson), checked 2026-10-05
- Massey Ferguson MF M Series page (US), AGCO Corporation (Massey Ferguson), checked 2026-10-05
Where the maker’s own documents disagree
- Values recorded for the HST configuration. Mechanical (12×12 power shuttle): PTO 47.0 hp, lift 3,747 lb at lift points / 3,307 lb at 24 in, implement flow 12.7 gpm.
- HST lift values are printed as single centered entries spanning the model columns on the spec sheet; read as applying to 2M.50 and 2M.60.
- FL2814 lift capacity to maximum height at pivot pin 2,570 lb; 3,010 lb at 59 in height.
- Mid PTO not listed on the 2M spec sheet; drive type not stated.
Header photo: Massey Ferguson 1740M by Bene Riobó, CC BY-SA 4.0, via Wikimedia Commons.